17. PCMCIA ETHERNET FUNCTION
B–64113EN–1/01
1084
6 The screen below is used to check the state of the communication cable
and whether a communication destination exists.
Enter the IP address of a communication destination through MDI
keys, then press the [PING] soft key. Communication is performed
three times with the specified communication destination, and the
results are displayed.
Messages displayed:
Reply from IP–address
This message indicates that a response was received from the
specified communication destination and that the specified
communication destination exists on the network.
Request Timed out IP–address
This message indicates that no response was received from the
specified communication destination and that the specified
communication destination does not exist on the network.
Check if the power to the communication destination
equipment is turned on. Check also the parameter settings and
network installation for errors.
IP address Error (IP–address)
The specified IP address is incorrect. Check the entered IP
address.