
B–64113EN–1/01
13. INPUT/OUTPUT OF DATA
937
#7
G058
#6 #5 #4 #3
EXWT
#2
EXSTP
#1
EXRD
#0
G091 SRLNI3 SRLNI2 SRLNI1 SRLNI0
#7 #6 #5 #4 #3 #2 #1 #0
G092 BGEN BGIALM BGION IOLS IOLACK
#7 #6 #5 #4 #3 #2 #1 #0
F053 BGEACT RPALM RPBSY
#7 #6 #5 #4 #3 #2 #1 #0
EDGNF177 EPARM EVAR EPRG EWTIO ESTPIO ERDIO IOLINK
#7 #6 #5 #4 #3 #2 #1 #0
F178 SRLNO3 SRLNO2 SRLNO1 SRLNO0
#7 #6 #5 #4 #3 #2 #1 #0
0020
I/O CHANNEL: Selection of an input/output device or selection of input device in
the foreground
Setting entry is acceptable.
[Data type] Byte
[Valid data range] 0 to 35
I/O CHANNEL: Selection of the input/output device to be used
The CNC provides the following interfaces for data transfer to and from
the host computer and external input/output devices:
D Input/output device interface (RS–232–C serial port 1, 2)
D DNC2 interface
Data input/output can be performed with a personal computer connected
via FOCAS1/Ethernet or FOCAS1/HSSB. Data input/output can be
performed with the Power Mate CNC via the FANUC I/O Link.
This parameter selects the interface used to transfer data to and from an
input/output device.
Setting Description
0, 1 RS–232–C serial port 1
2 RS–232–C serial port 2
4 Memory card interface
5 Data server interface
6 The DNC operation is performed or M198 is specified by FOCAS1/
Ethernet.
10 DNC2 interface, OSI–Ethernet
15 M198 is specified by FOCAS1/HSSB. (Bit 1 (NWD) of parameter
No. 8706) must also be specified.)
20
21
22
to
34
35
Group 0
Group 1
Group 2
to
Group 14
Group 15
Data is transferred between the CNC and a Power
Mate CNC in group n (n: 0 to 15) via the FANUC I/O
Link.
Signal address
Parameter