B–64113EN–1/01
12. DISPLAY/SET/EDIT
817
6711 Number of machined parts
This parameter can be entered on the setting screen.
[Data type] Two–word
[Unit of data] One piece
[Valid data range] 0 to 99999999
The number of machined parts is counted (+1) together with the total
number of completed parts when the M02, M30, or a M code specified
by parameter No. 6710 is executed.
NOTE
When bit 0 (PCM) of parameter No. 6700 is set to 1, the
number of parts is not counted with M02 and M30.
6712 Total number of machined parts
This parameter can be entered on the setting screen.
[Data type] Two–word
[Unit of data] One piece
[Valid data range] 0 to 99999999
This parameter sets the total number of machined parts.
The total number of machined parts is counted (+1) when M02, M30, or
an M code specified by parameter No. 6710 is executed.
NOTE
When bit 0 (PCM) of parameter No. 6700 is set to 1, the
number of parts is not counted with M02 and M30.
6713 Number of required parts
This parameter can be entered on the setting screen.
[Data type] Word
[Unit of data] One piece
[Valid data range] 0 to 9999
This parameter sets the number of required parts.
Required parts finish signal PRTSF is output to the PMC when the
number of machined parts reaches the number of required parts. The
number of parts is regarded as infinity when the number of required parts
is zero. The PRTSF signal is then not output.