B–64113EN–1/01
12. DISPLAY/SET/EDIT
827
OPERATOR’S MANUAL
(M series) (B–64124EN)
III.12.1 GRAPHICS FUNCTION
(M series) (B–64124EN)
III.12.2 DYNAMIC GRAPHIC DISPLAY
OPERATOR’S MANUAL
(T series) (B–64114EN)
III.12.1 GRAPHICS FUNCTION
(T series) (B–64114EN)
III.12.2 DYNAMIC GRAPHIC DISPLAY
OPERATOR’S MANUAL
(M series) (B–64144EN)
III.12.1 GRAPHICS FUNCTION
(M series) (B–64144EN)
III.12.2 DYNAMIC GRAPHIC DISPLAY
OPERATOR’S MANUAL
(T series) (B–64134EN)
III.12.1 GRAPHICS FUNCTION
(T series) (B–64134EN)
III.12.2 DYNAMIC GRAPHIC DISPLAY
The load meter can be displayed for each servo axis and the serial spindle.
The load meter can be displayed for up to three servo axes by setting
parameters 3151 to 3153.
When serial spindles are used, the load meter and speedometer can be
displayed only for the main serial spindle.
Although the speedometer normally indicates the speed of the spindle
motor, it can also be used to indicate the speed of the spindle by setting
bit 6 (OPS) of parameter 3111 to 1.
#7 #6 #5 #4 #3 #2 #1 #0
3111 OPS OPM
[Data type] Bit
OPM Operating monitor
0 : Not displayed
1 : Displayed
OPS The speedometer on the operating monitor screen indicates:
0 : Spindle motor speed
1 : Spindle speed
Reference item
12.1.13
Displaying Operating
Monitor
General
D Display of the servo axes
D Display of the spindle
axes
D Speedmeter
Parameter