
18. TROUBLE DIAGNOSIS
B–64113EN–1/01
1118
Guidance tables on an Excel sheet is need to be converted to a memory
card file which CNC can reads. A procedure of conversion is as follows.
(1)Finish to making both guidance tables (1) and (2), and then push
[Convert] button on a guidance table (1).
S In PC, a sub folder (directory) named ”GUIDEDAT” is made in the
folder where an Excel sheet is installed. And text type files are
made in this sub folder.
(2) Execute ”TXT2MEM.BAT” at MS–DOS prompt. ”TXT2MEM.BAT”
is also installed in the same folder as an Excel sheet.
Ex.) In case that an Excel sheet is installed in a folder ”D:\FLOW\”
Type ”TXT2MEM” and push an enter key.
D:\FLOW>TXT2MEM[Enter]
(3) A file named ”GUIE_USR.MEM” (for English) or ”GUIJ_USR.MEM”
(for Japanese) is made in the same folder as an Excel sheet.
(4)Load ”GUIE_USR.MEM” or ”GUIJ_USR.MEM” into a CNC via a
memory card by the boot function. Then it is possible to diagnose the
machine alarms.
It is possible to load both of ”GUIE_USR.MEM” and
”GUIJ_USR.MEM”. In this case one of them can be selected by a
parameter JPN (No.13110#0). When this parameter is set, power must
be powered off.
When only one of them is loaded, loaded file is available irrespective
of a parameter JPN (No.13110#0).
Converting an Excel
sheet to a memory card
file
A procedure of
conversion