Index
B–64113EN–1/01
Note
Volume 1 : Up to Page 692 / Volume 2 : Page 693 and later
i–1
ƠNumbersơ
2nd reference position return/3rd, 4th reference position return,
235
ƠAơ
Abnormal load detection, 179
Absolute position detection, 55
Acceleration/deceleration control, 453
Actual speed display, 857
Actual spindle speed output (T series), 551
Advanced preview control, 402
AI advanced preview control function/AI contour control
function (M series), 422
Alarm signal, 159
Angular axis control, 113
Angular axis control/arbitrary angular axis control, 113
Automatic acceleration/deceleration, 453
Automatic corner deceleration, 398
Automatic corner override (M series), 387
Automatic operation, 272
Automatic tool length measurement (M series)/automatic tool
offset (T series), 948
Auxiliary function, 478
Auxiliary function lock, 491
Axis control, 1
ƠBơ
Background editing, 886
Backlash compensation, 39
Bell–shaped acceleration/deceleration after cutting feed
interpolation, 465
Bidirectional pitch error compensation, 41
Butt–type reference position setting, 238
ƠCơ
Canned cycle (M series)/canned cycle for drilling (T series),
753
Canned cycle (T series)/multiple repetitive canned cycle (T
series), 766
Checking communication, 1089
Checking the setting of each parameter, 1088
Cheek items related to connection, 1088
Chuck/tailstock barrier (T series), 149
Circular interpolation, 322
Clock function, 801
CNC ready signal, 129
Command format, 622
Communication parameter input method, 1079
Connection among spindle, spindle motor, and position coder,
612
Constant surface speed control, 540
Constant velocity command position control, 1035
Controlled axes, 2
Controlled axes detach, 12
Conversational programming with graphic function, 888
Coordinate system rotation, 789
Corner control, 469
Cs axis connrdinate setup function, 589
Cs contour control, 573
Custom macro, 739
Cutter compensation, 714
Cutter compensation C (M series), 714
Cutting feedrate clamp, 370
Cycle start/feed hold, 273
Cylindrical interpolation, 349
ƠDơ
Data input/output functions based on the I/O Link, 915
Decimal point programming/pocket calculator type decimal
point programming, 724
Direct operation by PMC or OPEN CNC, 1067
Display data on the diagnosis screen, 618
Display of hardware and software configuration, 813
Display/set, 801
Display/set/edit, 800
Displaying alarm history, 808
Displaying operating monitor, 827
Displaying operation history, 802
DNC operation, 305
DNC operation by the PMC or OPEN CNC (PC with HSSB
connection), 1067
DNC2 interface, 902
Dry run, 286
ƠEơ
Edit, 881
EMB_ETH FOCAS1/Ether log screen, 1093
EMB_ETH MASTER CTRL log screen, 1092
Emergency stop, 126