
B–64113EN–1/01
7. FEEDRATE CONTROL/ACCELERATION
AND DECELERATION CONTROL
445
AI advanced
preview control
or AI contour
control
Bit 1 (AIR)
of parameter
No. 7054
Bit 1 (LRP)
of parameter
No. 1401
G27, G28, G30, G30.1, G53 G00
0 0 Non–linear interpolation type Non–linear interpolation type
0 1 Non–linear interpolation type Linear interpolation type
1 0 Non–linear interpolation type Non–linear interpolation type
1 1 Non–linear interpolation type Linear interpolation type
0 0 Linear interpolation type Linear interpolation type
0 1 Linear interpolation type Linear interpolation type
1 0 Non–linear interpolation type Non–linear interpolation type
1 1 Linear interpolation type Linear interpolation type
NOTE
When an index table indexing axis is specified, G27, G28,
G30, G30.1, or G53 is executed with AI advanced preview
control or AI contour control turned off, regardless of the
setting of bit 3 (AZR) of parameter No. 7054.
AIL When non–linear type positioning is specified in AI advanced preview
control or AI contour control mode and an axis–by–axis interlock signal is
input:
0 : The tool stops along all axes.
1 : The setting of bit 4 (XIF) of parameter No. 1002 is used.
#7
7055
#6 #5 #4
ADP
#3 #2
ALZ
#1
AF1
#0
ACO
[Data type] Bit
ACO In AI advanced preview control or AI contour control mode:
0 : Automatic corner override and changing both internal and external
circular feedrates are disabled.
1 : Automatic corner override and changing the internal circular feedrate
are enabled, and whether to enable changing the external circular
feedrate depends on the setting of bit 2 (COV) of parameter No. 1602.
AF1 During one–digit F code feed in AI advanced preview control or AI
contour control mode, changing the feedrate by the manual handle is:
0 : Disabled.
1 : Enabled.
ALZ If no reference position has been established and G28 is specified in AI
advanced preview control or AI contour control mode:
0 : P/S alarm No. 090 is issued.
1 : AI advanced preview control or AI contour control mode is turned off
and the command is executed.