
1. GENERAL
B–61863E/15
STEP SEQUENCE FUNCTION
972
Follow the procedure below to create a step sequence program. Use a
personal computer on which the FANUC LADDER software package is
installed to code (edit) a program. Use a CNC to execute, debug and
correct the ladder subprogram.
(1) Create step sequence program (editing)
(2) Create a subprogram of ladder diagram (editing)
(3) Compile
(4) Transfer to the CNC device (with the memory card or RS232C)
(5) Write to the FlashROM
(6) Execute
(7) Diagnosis and debugging
(8) Correct a subprogram of ladder diagram (editing)
Personal
Computer
FANUC LADDER
software
(5) Write to the FlashROM
PMC- SB4/SB6/
SC4/NB2
±
RS232C
Memory
card
CNC device
(4) Transfer to the
CNC device
FlashROM
(1) Create Step Sequence program
(editing)
(2) Create a subprogram of ladder
diagram (editing)
(3) Compile
(6) Execute
(7) Diagnosis and debugging
(8) Correct a subprogram of ladder diagram (editing)
Fig. 1.3 Programming to create a program
Table1.3 lists the step sequence functions supported by a personal
computer (on which the FANUC LADDER software package is
installed) and CNC.
1.3
PROGRAMMING