
B–61863E/15
3. DISPLAYING PMC INPUT/OUTPUT
SIGNALS AND INTERNAL RELAY
(PMCDGN)
PMC–NB6 MANIPULATION
659
On trace screen, pushing [START] soft key starts the execution of trace
after you set the trace parameter correctly. The following is the screen
example of the trace execution by ”TIME CYCLE” mode.
The result of trace is immediately displayed during execution of the trace.
When the stop condition that is set in parameter setting screen is satisfied
the execution is finished. Pushing [STOP] soft key aborts the execution.
The following is the screen example of the trace execution by ”SIGNAL
TRANSITION” mode.
In ”SIGNAL TRANSITION” mode, graphic display is not refreshed until
any signal for sampling trigger changes.
3.5.3
Execution of Trace