
B–61863E/15
L. MIGRATION OF LADDER PROGRAMS
BETWEEN DIFFERENT MODELS
APPENDIX
1549
(3)Convert to the mnemonic form file from source program of (2). (**B)
Select the ”MNEMONIC EDIT”, and specify the ”SOURCE
PROGRAM → MNEMONIC FILE”. The empty mnemonic form file
is made.
(4)Exit FANUC LADDER–II, and start up the text editor.
Specify the mnemonic form file of (3) as the edit file name.
(5)Replace the symbol data of the mnemonic form file(PMC–SA3) of (3)
with the converter file of ”FS0T_CNV.SYM” or ”FS0M_CNV.SYM”.
(**C)
The converter file is stored in ”\Appendix” of the installed
directory or system floppy of FANUC LADDER–II.
FS0M–CNV.SYM: For converting to Series 0i–MA from
Series 0M
FS0T–CNV.SYM: For converting to Series 0i–TA from
Series 0T
(6)Replace the ladder data of the mnemonic form file(PMC–SA3) of (3)
with the ladder data of the mnemonic form file(PMC–M) of (1). (**D)
(7)Exit the text editor, and start up FANUC LADDER–II.
(8)Select the PMC–RA1(SA1) as PMC model, and convert to the source
program from the mnemonic form file of (5). Select the
”MNEMONIC EDIT”, and specify the ”MNEMONIC FILE →
SOURCE PROGRAM”.
(9)Delete all symbols and comment data on the ”SYMBOL &
COMMENT” of the ”EDIT”.