
8. WRITING, READING, AND COMPARING
SEQUENCE PROGRAMS AND
PMC PARAMETERS
B–61863E/15
PMC–NB6 MANIPULATION
788
When “FLASH ROM” is selected for DEVICE, output to and input from
flash ROM are enabled.
NOTE
The above screen is displayed when the C language board
is installed. When the C language board is not installed,
only LADDER is indicated on the menu of the KIND OF
DATA.
D FUNCTION
The available data input/output commands are displayed. Select the
desired command by moving the cursor horizontally to that command
or select it with the corresponding soft key.
Soft keys displayed when the cursor is positioned to ”FUNCTION”
Explanation of options
WRITE: Outputs sequence programs from the PMC to flash
ROM.
READ: Inputs sequence programs from flash ROM to the PMC.
COMPARE:Compares the sequence programs on the PMC with those
on flash ROM.
When you read a file from a flash ROM, one of following messages
appears and whether to operate the important thing is confirmed.
Sequence program:
THE FILE CONTAINS LADDER PROGRAM. PROCEED TO
READ IT?
8.4
OUTPUTTING TO
AND INPUTTING
FROM FLASH ROM