
3. PMC I/O SIGNAL DISPLAY AND
INTERNAL RELAY DISPLAY
(PMCDGN)
B–61863E/15
PMC OPERATION (CRT/MDI)
444
: Standard
Ę : optional
: cannot be used
n : Can be used for the 4084 series.
Power
Mate-
D/F
Power
Mate-H
FS20/
FS21A
FS21B FS18A FS18B FS16A
FS16A/B
FS18B
FS16C
FS18C
FS21i
FS16i
FS18i
FS16A
FS16A
/B/C
FS18B/C
FS16B/C
FS18B/C
FS15B
PA1 PA3 PA3 SA1 SA3 SA1 SA3 SA1 SA2 SA3 SA1 SB SB2 SB3 SB4 SB5 SB6 SA1 SA5 SB5 SB6 SC SC3 SC4 NB NB2
n n Ę Ę Ę Ę Ę Ę Ę Ę
D The ladder editing module is required for the PMC–SB/SB2/SB3 of the
Series 16 –MODEL A and for the PMC–SA1/SA2/SA3 of the Series
18–MODEL A.
D This function is provided as a standard function with
PMC–SA1/SB3/SB4/SB5/SB6/SC3/SC4 of the Series
16/18–MODEL B/C, and PMC–SA1/SA3 of the Series 21/210–MB.
1) Pressing the [M.SRCH] soft key changes the screen to that shown in
Fig. 3.5.2. The displayed soft keys also change.
2) Enter a physical address in hexadecimal from which the contents of
the memory are to be displayed. Then pressing the [SEARCH] key
displays 256 bytes of stored data starting from the specified address.
Example) Entering 100000, then pressing the [SEARCH] key
displays the contents of the memory starting from
100000H.
3) An address can be changed using the <PAGE ↓> or <PAGE ↑> key.
4) Pressing either the [BYTE], [WORD], or [D.WORD] soft key
displays data of the corresponding type.
CAUTION
If an address at which the memory is not used is specified,
a system error occurs. Be sure to specify the correct
address.
3.5
DISPLAYING THE
CONTENTS OF
MEMORY (M.SRCH)
3.5.1
Operation