
B–61863E/15
6. SCREEN OPERATION
(PMC–SB4/SB6/SC4/NB2)
STEP SEQUENCE FUNCTION
1031
The PMC–SB4, SB6, SC4 and NB2 can be used with either the ladder
method or step sequence method. When a step sequence program is
transferred to the old version of the PMC, ER08 OBJECT UNMATCH
is displayed on the PMC/ALARM screen.
The model setting of FANUC LADDER determines whether the ladder
or step sequence method is used. The STEP SEQUENCE item has been
added to the system parameter screen for future expansion. Specify the
parameter according to the model setting of FANUC LADDER.
To create a program with the built–in edit function, after the parameter has
been set execute CLEAR ALL. Alternatively, while holding down “X”
and “O” key, turn the power off and on.
When the step sequence method is used: STEP SEQUENCE = YES.
When the ladder method is used: STEP SEQUENCE = NO.
PMC SYSTEM PARAMETER (1/2) MONIT STOP
COUNTER DATA TYPE = BINARY / BCD
STEP SEQUENCE = YES / NO
>
[BINARY] [ BCD ] [ ] [ ] [ ]
Fig. 6.6 (a) PMC–SB4/SB6 system parameter screen (first page)
PMC SYSTEM PARAMETER (2/2) MONIT STOP
FS0 OPERATOR PANEL = YES / NO
KEY DI ADDRESS =
LED DO ADDRESS =
KEY BIT IMAGE ADDRESS =
LED BIT IMAGE ADDRESS =
>
[ YES ] [ NO ] [ ] [ ] [ ]
Fig. 6.6 (b) PMC–SB4/SB6 system parameter screen (second page)
6.6
COMPATIBILITY OF
LADDER DIAGRAM