
B–61863E/15
7. OPERATION (PMC–SB7)STEP SEQUENCE FUNCTION
1047
(b)Other operations
Cursor move keys, Page change keys
You can move cursor by all cursor move keys and Page change keys.
And if you entered step number or symbol and press Right cursor
move key, the program according to the proceeding string is searched
and the cursor points the program.
This screen is displayed by pushing [STATE] key on the Subprogram List
Viewer screen or Step Sequence Monitor screen.
The elapsed time and run status of currently selected step sequense
program is displayed.
Fig. 7.2.2 Step Sequence State Screen (Subprogram)
(a) Screen Structure
1. STEP NO.
Displays a step number. The symbol information of the address of
that step number is displayed to the right.
2. STATUS
When ”EXEC” is displayed, it means active. When it isn’t
displayed, it means inactive.
3. ELAPSE
The time elapsed after the step is in active state is displayed. The
time is increasing during active state.
4. MONITOR
It means that the time monitor settings is effective.
In the message line, error messages or inquiry messages will be displayed
depending on the situation.
D T(x): monitoring timer number
D OVER: an elapsed time is over monitoring time
7.2.2
Step Sequence State
Screen (Subprogram)