
8. FUNCTIONS FOR DISPLAYING MEMORY
AREAS AND DEBUGGING
THE PROGRAM (MONIT)
B–61863E/15
PMC PROGRAMMER (CRT/MDI)
608
Fig. 8.5.1 Online monitor setting screen
Meanings of Soft key
EMG ST : Terminates communication forcibly. Use this key if
communication becomes abnormal and the connection
cannot be terminated normally.
INIT : Initializes the parameters to their default values.
NOTE
1 In case of configuration of CNC with which neither Ethernet
nor HSSB is available, the item of ”HIGH SPEED I/F” is not
displayed.
2 In case of display which has 5+2 soft key, two pages are
used for this setting screen.
Switch the page by <Page Up> or <Page Down> key.
To communicate with FANUC LADDER–II, FANUC LADDER–III or
Ladder Editing Package, you need to put the PMC system in waiting
situation of the connection. There are two ways for setting this, setting at
PMC screen and setting in NC parameter. Also, there are three connection
types, for example Ethernet, RS–232C or HSSB.
8.5.1
Online Setting Screen
8.5.2
Setting of online
connection