
6. LADDER DIAGRAM MONITOR
AND EDITOR
B–61863E/15
PMC–NB6 MANIPULATION
728
(a) Setting items
LADDER Diagram Editor Setting screen contains the setting items
below:
D ADDRESS NOTATION
Determines whether the bit and byte addresses in the LADDER
Diagram are displayed as corresponding symbols, or the
addresses themselves.
SYMBOL (default)
Addresses that have a symbol are displayed by the symbols.
Addresses without symbols are displayed by the addresses
themselves.
ADDRESS
All addresses are displayed as the addresses themselves even
if they have a symbol.
D RELAY COMMENT
Set the style of relay comment. These are three options as below.
When you display relay comment, less ladder diagram nets are
shown.
NONE (default)
Relay comments are not displayed.
1 LINE
Relay comments are displayed in one line. Up to 15
characters can be displayed. Characters after 16th character
will not be displayed. Width of a relay with comment of more
than 7 characters will be extended.
2 LINE
Relay comments are displayed in two lines. Up to 30
characters can be displayed. Width of a relay with comment
of more than 7 characters will be extended.
6.2.3
Setting Screen