
8. FUNCTIONS FOR DISPLAYING MEMORY
AREAS AND DEBUGGING
THE PROGRAM (MONIT)
B–61863E/15
PMC PROGRAMMER (CRT/MDI)
614
(3)Select the [Setting] tab, and add the IP Address to ”Use device”.
(4)Push the <Connect> button for start of the communication.
Ladder Editing Package can be connected by the same operation too.
Refer to ”FANUC LADDER–III OPERATOR’S MANUAL”
(B–66234EN) as for the detail of operation of FANUC LADDER–III.
Refer to ”LADDER EDITING PACKAGE (Windows) OPERATOR’S
MANUAL” (B–63484EN) as for the detail operation of Ladder Editing
Package.
CAUTION
1 When one of the following screens is displayed at PMC, the
online communication can not be used. Change to other
screens from the following screens, and use the online
function.
[PMCLAD], [I/O], [EDIT], [SYSPRM], [TRACE], [USRDGN],
[DBGLAD], [GDT], [USRMEM]
2 When the online function is used with RS–232C, the
selected channel is occupied by the PMC system. To use
other input/output functions with RS–232C, specify other
channel setting than the one used by online function.
3 Loader control function can not connect with FANUC
LADDER–III or Ladder Editing Package by Ethernet.