
B–61863E/15
6. SCREEN OPERATION
(PMC–SB4/SB6/SC4/NB2)
STEP SEQUENCE FUNCTION
1015
The diagnosis and debugging of a step sequence program have four
screens.
(1) Program configuration list (main screen)
(2) Step sequence screen
(3) List screen
(4) Ladder screen
Press the [STPSEQ] key and display the program configuration list.
STPSEQ <<MAIN>> PROGRAM:(STEP SEQUENCE DEMO PROGRAM) MONIT RUN
P0001 ( ) SUB PROGRAM NO.1
LEVEL1 LEVEL2 LEVEL3
V P0001 V P0002 V P0004 V P0005 V P0006 V P0007
V P0008 V P0009 V P0014 V P0015 V P0016 V P0017
V P0021 V P0022 V P0024 V P0025 V P0026 V] P0027
⋅⋅⋅⋅ ⋅ ⋅
⋅⋅⋅⋅ ⋅ ⋅
V P0101 V P0202 V]P0304 V]P0405 V]P0406 V]P0407
[ UP ] [ DOWN ] [ TIME ] [ P–ADRS ] [ ZOOM ]
Items displayed on the screen
Display Contents Display by [ZOOM] key
LEVEL1 Ladder first level Ladder diagram
LEVEL2 Ladder second level Ladder diagram
LEVEL3 Ladder third level note1) Ladder diagram
V Pxxx Subprogram Ladder diagram
V] Pxxx Subprogram Step sequence diagram
Pxxx indicates a subprogram number.
NOTE
The third level ladder can be omitted.
[ZOOM] key
To display the contents of a program, position the cursor to the
program number and press the [ZOOM] key. The step sequence
diagram (Fig. 6.1.2 (b)) or ladder diagram (Fig. 6.1.3 (c) is
automatically displayed according to the type of the program.
[TIME] key
Press the [TIME] key to display the time display screen (Fig. 6.2.1)
and time monitor screen (Fig. 6.3).
[P–ADRS/P–SYMB] key
Displays the addresses specified to subprograms, using addresses or
symbols, if symbols have been assigned. When the [P–ADRS] key
ispressed, the addresses are displayed. When the [P–SYMB] key is
pressed, the symbols are displayed.
6.1
DISPLAYING OF
SEQUENCE
PROGRAM
6.1.1
Program Configuration
List (Main Screen)