
B–61863E/15
4. OPERATIONPMC PROGRAMMER (SYSTEM P series)
1101
*** CROSS REFERENCE LIST ***
PAGE=1
ADDRESS SYMBOL COMMENT DATA
G0000.0 *IT
653
G0000.1 *CST
653
G0000.4 *ESP
22 568 901 912 1177 1189 1288 2800
G0000.5 *SP
45 2802
G0000.7 ERS
3435 3512
G0001.0 *AIT
656
NOTE
1 When the same address performs double writing,”*
MULTIPLE COIL USED *” is displayed.
2 If the F10 key is set to OFF and output performed, the cross
reference table is displayed on the screen.
A 12–inch chart is also applicable to the FANUC printer (external
printer).
(The standard chart size is 11 inches.) Enter the command for changing
the chart by the following operation.
(1) Press [R3] key from the R key menu screen.
(2) ’REQUEST=’ is displayed at the lower left part of the screen.
(3) Key in ’PAPER <NL>’.
(4) The following message is displayed at the lower left part of the screen.
KEY IN NUMBER OF PAPER LENGTH
EXAMPLE 11–INCH;0,12–INCH;1.
LINE NUM.=
(5) Key in ’0 <NL>’ for 11–inch chart, or ’1 <NL>’ for 12–inch chart.
4.5.2
Paper Command