
6. LADDER DIAGRAM MONITOR
AND EDITOR
B–61863E/15
PMC–NB6 MANIPULATION
702
2. Nets wider than the screen width are displayed as ”Continuous
Net” using continuous marks (”>A1>”).
Same continuous marks mean they are connected with each other.
(c) Monitor
1. Contacts and coils are displayed in different colors according to
the status of the signal. The status of power flow is not displayed.
2. The contents of address parameters of functional instructions are
not shown in default setting. With the extended functional
instruction format, you can see the contents of the parameters.
See ”Setting Screen” for the detail.
(d) Displaying Symbols and Comments
1. If an address has a symbol name assigned, the symbol name will
be displayed instead of the address itself at default setting. You
can force not to show symbol by setting. See ”Setting Screen”
for the detail.
2. If the address used with coil has a comment string assigned, the
comment strings will be displayed at the right margin beside the
coil. You can use this margin area to display an additional relay
instead of the comment string by setting: at this setting, one more
relay can be displayed in each diagram line. See ”Setting Screen”
for the detail.