
B–61863E/15
10. ONLINE FUNCTION
FS16i/18i/21i/0i–B PMC–SA1/SB7 MANIPULATION
957
When you try to connect FANUC LADDER–III or Ladder Editing
Package (Window version) with CNC by Ethernet, it is necessary to set
some Ethernet parameters. The setting of Ethernet parameters can be set
in the following Ethernet parameter screen of CNC. Please refer to
”FANUC Ethernet Board/DATA SERVER Board OPERATOR’S
MANUAL” (B–63354EN) about the detail of the setting screen and
setting parameters. The setting item necessary for Ethernet connection for
PMC online function is as follows.
– IP ADDRESS (Set the IP address of CNC. 192.168.0.1
etc.)
– SUBNET MASK (Set the mask address of the IP address.
255.255.255.0 etc.)
– ROUTER IP ADDRESS (If you use the router, set the Router IP
Address.)
– PORT NUMBER (TCP) (8193 etc.)
Fig. 10.3.1(a) Ethernet Board
Fig. 10.3.1(b) Embedded Ethernet
10.3
ONLINE FUNCTION
BY ETHERNET
10.3.1
Setting of Ethernet
Parameters