
6. SIGNAL TRACE
FUNCTION (PMC–SB7)
B–61863E/15
FS16i/18i/21i/0i–B PMC–SA1/SB7 MANIPULATION
932
On trace screen, pushing [START] soft key starts the execution of trace
after you set the trace parameter correctly. The followings are the screen
examples of the trace execution by ”TIME CYCLE” mode and ”SIGNAL
TRANSITION” mode
Execution of Trace screen (TIME CYCLE mode)
Execution of Trace screen (SIGNAL TRANSITION mode)
The result of trace is immediately displayed during execution of the trace.
When the stop conditions that is set in parameter setting screen is satisfied
the execution is finished. Pushing [STOP] soft key aborts the execution.
In ”SIGNAL TRANSITION” mode, graphic display is not refreshed until
any signal for sampling trigger changes.
6.4
EXECUTION OF
TRACE