
6. LADDER DIAGRAM MONITOR
AND EDITOR
B–61863E/15
PMC–NB6 MANIPULATION
706
3
In this case, you can still search the byte address ”D0” by entering
”D00”. The excess ”0” avoids the conflict with the symbol ”D0”.
3. When the range for searching is GLOBAL, and the target is found
in other than displaying subprogram, the screen will automatically
switch to the subprogram to which the found target belongs.
Searching GLOBAL net number that current subprogram does not
contain, for example, the subprogram that contains the net of the net
number will appear in the screen, displaying the net.
(d) Shortcuts
1. Right/left cursor move keys that are following some string means
searching forward/backward. You can use following strings for
this search operation:
D Digits for net number
D ”1” for top, ”0” for bottom
D ”S” + digits, for Functional instructions
D Other string for symbol or bit/byte address
D Leading space always makes the string treated as a symbol
or address.
Example: ”_123”+[SEARCH] (”_” means space) will search
the symbol ”123” instead of the 123rd net.
2. When cursor is hidden, left/right cursor move keys without string
act just like [PREV]/[NEXT] soft keys.
3. String followed by [SEARCH MENU] soft key in ”PMCLAD
Main soft keys” starts searching directly. In this case, [SEARCH
MENU] soft key acts just like right cursor move key.
4. [SEARCH] soft key in ”Search soft keys” without string searches
the address or the functional instruction under cursor forward. If
cursor is hidden, or cursor is placed neither on a relay nor on a
functional instruction, this operation just repeats the last
successful search forward, just like [NEXT] soft key.
5. [WRITE SEARCH] soft key without string searches forward a
write coil of the same address with relay under cursor. If cursor
is hidden, or cursor is not placed on a relay, this operation will
search a write coil of the bit address that is searched at last
successful search. If the last search was not made with bit
address, the last entered string for searching is used to determine
what bit address is to be searched for a write coil.
6. [FUNC SEARCH] soft key without string searches forward the
same functional instruction with one under cursor. If cursor is
hidden, or cursor is not placed on a functional instruction, this
operation will search a functional instruction that is searched at
last successful search. If the last search was not made for
functional instruction, the last entered string for searching is used
to determine what functional instruction is to be searched.
7. [LIST] soft key following string that indicates subprogram,
switches subprogram on LADDER Diagram Monitor screen.
Examples for strings to specify subprogram are following:
”L1” Level 1
”P10”, ”10” Subprogram ”P10”
”0”(zero), ”G” Whole of LADDER program (Global)