
5. FUNCTIONAL INSTRUCTIONS
B–61863E/15
PMC SEQUENCE PROGRAM
266
This instruction defines 1, 2, or 4–bytes long binary constant. Data
entered in decimal during programming is converted into binary data
during program execution. The binary data is stored in the specified
memory address(es).
In PMC–SA5/SB5/SB6/SB7 for Series 16i/160i/18i/180i/21i/210i,
Power Mate i, PMC–SB7 for Series 0i–B, and PMC–NB6 for Series
15i/150i, the setting of the format specification parameter is extended.
With this setting, NUMEB can store multiple data by 1 instruction. This
extended specification is effective when initializing a large memory area
with value. For the details of the setting of a format specification
parameter, refer to “5.42.4 Parameters”.
NUMEB
(SUB 40)
f
Format
specifi–
cation
ffff
Constant
ACT
ffff
Constant
output
address
Fig. 5.42.2 (a) NUMBER instruction format
NUMEB
(SUB 40)
ffff
Format
specifi–
cation
ffff
Constant
ACT
ffff
Constant
output
address
Fig. 5.42.2 (b) Expression format of NUMEB (extended specification)
(only for PMC–SA5/SB5/SB6/SB7 for Series 16i/160i/18i/180i /21i/210i
Power Mate i, PMC–SB7 for Series 0i–B, and PMC–NB6 for Series 15i/150i)
(a) Command (ACT)
ACT= 0 : Do not execute NUMEB.
ACT= 1 : Execute NUMEB.
5.42
NUMEB (DEFINITION
OF BINARY
CONSTANTS)
5.42.1
Function
5.42.2
Format
5.42.3
Control Conditions