
5. LADDER DIAGRAM EDITOR
FUNCTION (PMC–SB7)
B–61863E/15
FS16i/18i/21i/0i–B PMC–SA1/SB7 MANIPULATION
902
Program List
Change to search soft keys
Add new net
Edit net Select multiple nets
Delete net
Cut net
Make changes effective
Copy net
Paste net
RUN/STOP a sequence program
Abandon changes
Setting screen
Soft keys on the Ladder Diagram Editor screen
Fig. 5.3 Soft keys on Ladder Diagram Editor screen
(a) Operations using the soft keys
1. [LIST] Call Program List Editor screen
Calls Program List Editor screen. On Program List Editor screen,
you can select a subprogram to be edited on Ladder Diagram Editor
screen.
2. [SEARCH] Search and jump menu
Switches to the search soft keys. To return to the main soft keys,
press the Return key [<]. The search soft keys are quite same with
ones of Ladder diagram Monitor screen.
3. [MODIFY] Call Net Editor screen
Calls Net Editor screen to modify structure of the selected net.
4. [CREATE] Create new net
Create and add new net to cursor position. Pressing this soft key
reaches Net Editor screen, so that new net is constructed.
5. [UPDATE] Make changes effective
Updates running the ladder program to currently edited ladder
program, so that the all modifications will take effects, and remains
Editor screen. If it succeeds to update running ladder, edited ladder
starts to run.
WARNING
You have to pay special attention to modify running ladder
program. If you modify the ladder program in wrong way, or
update the ladder program with the machine in improper
status, it may cause unexpected reaction of the machine.
You have to make it sure that ”modifications you make on
the ladder program is appropriate”, ”machine is in proper
status”, and ”nobody is near the machine”, when you update
the ladder program.
5.3
SCREEN
OPERATIONS