
11. PMC PROGRAMMER (DPL/MDI)
(ONLY FOR THE Power Mate)
B–61863E/15
PMC PROGRAMMER (CRT/MDI)
630
1 Press the <CAN> or <WRITE> key.
2 ”EXECUTING” is displayed.
N0001
EXECUTING
3 The PMC editing menu appears.
NOTE
1 If the sequence program contains an error, the PMC editing
menu is not displayed but an error message appears on the
screen.
(Example) Error message
Pressing the <↑> or <↓> cursor key displays the ladder
mnemonics editing screen.
2 Pressing the <POS>, <PRGRM>, <VAR>,
<DGNOS/PARAM>, or <ALARM> key during the editing of
the sequence program displays the CNC screen by forcibly
terminating editing even if the program contains an error.
3 When K19#0 of the keep relay area for PMC parameter is
set to 1, the screen for storing the sequence program into
FLASH ROM is displayed after ladder editing. (Only for
Power Mate–H, Power Mate i–D/H)
Please refer to the item 11.7 and storing the sequence
program into FLASH ROM.
4 When parameter is multiple use error, the error message is
displayed on the screen.
(Example) Error message
Pressing the <↑> or <↓> cursor key displays the ladder
mnemonics editing screen. Pressing <CAN> or <WRITE>
key again displays the PMC programmer menu.
END FUNCTION
MISSING
DEVICE=F–ROM
>WRITE Y/N [YES]
FUNC. PARAM NO.
DUPLICATE
11.4.4
Ending Ladder
Mnemonics Editing