
11. PMC PROGRAMMER (DPL/MDI)
(ONLY FOR THE Power Mate)
B–61863E/15
PMC PROGRAMMER (CRT/MDI)
634
The table below lists the details of the errors which may occur during
storage into FLASH ROM using the DPL/MDI (only for the Power
Mate–H and Power Mate i–D/H).
Error message Description
PROGRAM DATA
ERROR
The ladder data in RAM is invalid. Alternatively,
there is no RAM or ROM.
SIZE ERROR The program exceeds the maximum size which can
be written into F–ROM.
NOT EMG STOP The CNC is not in the emergency stop state.
OPEN ERROR The OPEN processing has failed.
ERASE ERROR The ERASE processing has failed.
The F–ROM cannot be erased. Alternatively, the
F–ROM is defective.
WRITE ERROR The WRITE processing has failed.
The F–ROM cannot be written. Alternatively, the
F–ROM is defective.
11.8
ERROR DETAILS