
B–61863E/15
8. FUNCTIONS FOR DISPLAYING MEMORY
AREAS AND DEBUGGING
THE PROGRAM (MONIT)
PMC PROGRAMMER (CRT/MDI)
615
The communication status of RS–232C and HIGH SPEED I/F are
displayed at the online monitor screen during the online communication.
Fig. 8.5.4 Online monitor setting screen
USE TIME : The maximum time in the communication processing is dis-
played.
RS–232C : The communication condition of RS–232C is displayed.
HIGH SPEED I/F :
ETHER_BOARD :
HSSB :
The communication condition of HIGH SPEED I/F is dis-
played.
Displayed during the communication with Ethernet board.
The IP address of the communication partner is displayed.
Displayed during the communication with HSSB.
The display messages and the meanings are shown in the table of below.
Displayed messages Meanings
INACTIVE The communication is inactive.
STOPPING The communication is being stopped.(Wait for the
termination of communication)
STARTING The communication is being started.(Wait for the
termination of communication over another commu-
nication path)
STAND–BY The communication is active and in standby mode.
CONNECTED The communication is active and being connected.
NO OPTION The port can be not opened because there is not
option of RS–232C.
BAD PARAMETER Invalid open parameters are specified.
TIMEOUT ERROR A time–out has occurred and communication is
aborted.
8.5.4
Communication Status