
B–61863E/15
4. PMC PARAMETERS SETTING AND
DISPLAY (PMCPRM)
PMC OPERATION (CRT/MDI)
487
NC WINDOW FORMAT (TOOL DATA)
The format in functional instruction WINDR and WINDW are set.
When “MANUAL” is selected by “SPECIFY NC WINDOW
FORMAT”, this item is effective.
The window instruction of a new format can be used by selecting
“EXPAND”.
(The same meaning as bit 4 of NC parameter 7401 is 1.)
An old window instruction can be used by selecting “STANDARD”
(The same meaning as bit 4 of NC parameter 7401 is 0.)
GRAY SCALE DISPLAY
This parameter sets the ladder–related display method when a
monochrome LCD is used. When you find the screen display on the
monochrome LCD not easy to view, change this parameter setting.
When USE is selected, the difference in brightness is used for screen
display.
When UNUSED is selected, reverse video is used for screen display.
NOTE
A change made to this parameter does not become valid
until the power is turned on next. After the setting of this
parameter has been changed, the power must be turned off
then back on for the setting to become effective.
Enable or disable the following function and mode:
D Multi–language display function
D OVERRIDE mode of the forced input/output function
(1) Setting screen display
Each setting screen can be displayed by pressing the [NEXT] or
[PREV] soft key on the setting parameter screen.
[ YES ] [ NO ] [ ] [ PREV ] [ NEXT ]
[ INPUT ] [ ] [ ] [ PREV ] [ NEXT ]
Setting parameter
[ YES ] [ NO ] [ ] [ PREV ] [ NEXT ]
Setting parameter
(multi–language display function)
Setting parameter (OVERRIDE mode
of the forced input/output function)
4.4.1
Other Setting Screens