
6. LADDER DIAGRAM MONITOR
AND EDITOR
B–61863E/15
PMC–NB6 MANIPULATION
754
(1) Program List Viewer screen (Detail)
Program List Viewer screen (Detail) shows the detail information that
are program size, program net count and so on for program.
(a) Screen Structure
1. The title information (REMARKS) of the Ladder Program and
the total program count are displayed above the Program List.
2. In the message line, error messages or inquiry messages will be
displayed depending on the situation.
3. In the area for Program List, 14 data can be displayed at
maximum.
(b) Area of Program List
1. The icon ”
L
” means program type of Ladder. It is displayed in
the ”L/S” field for each program.
NOTE
Displaying requires ”Character registration function” of
CNC software, which is supported by Series F002 version
03 or later. If CNC software does not support it, Ladder
program type is always displayed ”L”.
L
2. Program name is displayed in the ”PROG NO.” field for each
program.
There are three kinds of program names.
PROGRAM : It means the whole program.
LEVELn (n=1,2,3) : It means the Ladder level 1, 2 and 3.
Pm (m=1 to 2000) : It means subprogram.
3. The symbol is displayed in the ”SYMBOL” field for each
program.
If no symbol is set into the subprogram, the ”SYMBOL” field
will be blank.
6.4.1
Screen Structures