4
4. PROGRAM FORMAT
84
Program format T series M series
G10P_X (U)_Y (V)_Z (W)_R (C)_Q_;
For geometry offset amount
P=10000+geometry offset number
For wear offset amount
P= wear offset number
R : Tool nose radius offset amount
Q : Imaginary tool nose number
f
G10L_PpRr ;
p : Offset No.
r : Tool compensation amount
Format
(1) For tool compensation memory A
G10L11P_R_;
(2) For tool compensation memory B
G10L10P_R_; (Setting/changing the geometric
compensation amount)
G10L11P_R_; (Setting/changing the wear
compensation amount)
(3) For tool compensation memory C
G10 L10 P_ R_ ; (Setting/changing the geometry
compensation amount for H
code)
G10 L11 P_ R_ ; (Setting/changing the geometry
compensation amount for D
code)
G10 L12 P_ R_ ; (Setting/changing the wear
compensation amount for H
code)
G10 L13 P_ R_ ; (Setting/changing the wear
compensation amount for D
code)
f
G10 L50 ; Parameter input mode on
N_ R_ ; Parameter input (for a parameter of
non–axis type)
N_ P_ R_ ; Parameter input (for a parameter of axis
type)
|
G11 ; Parameter input mode cancel
N_ : Parameter number (5–digit) or pitch error
compensation number +10000 (5–digit)
R_ : Parameter setting (The decimal point must
not be specified.)
P_ : Axis number (1 to 8)
f f