4
4. PROGRAM FORMAT
122
Program format T series M series
G101; Starts registration of the first program.
[B axis operation command]
G100; Ends program registration.
Similarly,
G102; Starts registration of the second program.
G103; Starts registration of the third program.
By programming a B axis operation between a
G101/G102/G103 command and G100 command,
programs (three types) for B axis control can be regis-
tered. Each registered program can be executed by
specifying the M code set in PRM8251/8252/8253.
G110 [one–motion move command];
Single movement
Specifies and executes a one–motion movement.
f
G161 Rr ;
G160 ; Cancel
r: Cut in depth
f