8. ALARM LIST
523
Alarm number Contents
Faulty location/
corrective action
GARBAGE AFTER
END
GARBAGE AFTER
END2
GARBAGE AFTER
END3
Remove unnecessary nets,
and move necessary nets
to proper position so that
they will be executed.
There are some nets after
END, END2 or END3, which
will not be executed.
OVERLAPPED JMP If JMPE is missing, add it in
proper position. If the JMP
is unnecessary, remove it.
There is no JMPE that cor-
responds to this JMP.
JMP/JMPE TO BAD
COM LEVEL
JMP and corresponding
JMPE must have same
COM/COME status. Re-
view JMP range and COM
range, to adjust not to over-
lap with each other: it is pos-
sible that one range in-
cludes the other complete-
ly.
JMP and corresponding
JMPE have different COM/
COME status.
COME IN JMP COME and corresponding
COM must have same JMP/
JMPE status. Review COM
range and JMP range, to
adjust not to overlap with
each other: it is possible
that one range includes the
other completely.
COME is found between
JMP and JMPE, and COM
and corresponding COME
have different JMP/JMPE
status.
END IN JMP
END1 IN JMP
END2 IN JMP
END3 IN JMP
If JMPE is missing, add it in
proper position. If JMP is
unnecessary, remove it.
END, END1, END2, or
END3 is found between
JMP and JMPE.
SP/SPE IN JMP If JMPE is missing, add it in
proper position. If the JMP
is unnecessary, remove it.
SP or SPE is found between
JMP and JMPE.
JMPB OVER COM
BORDER
JMPB and its destination
must have same COM/
COME status. Review
range of JMPB and COM
range, to adjust not to over-
lap with each other: it is pos-
sible that one range in-
cludes the other complete-
ly.
JMPB and its destination
differ in COM/COME status.
JMPB OVER LEVEL JMPB can only jump to the
same program level, or
within a subprogram. If the
JMPB is unnecessary, re-
move it. If LBL for the JMPB
is missing, add it in proper
position. If it should be
JMPC, correct it.
JMPB jumps to different
program level.
LBL FOR JMPB NOT
FOUND
If JMPB is unnecessary, re-
move it. If LBL is missing,
add it in proper position.
Can not find proper LBL for
JMPB.
JMPC IN BAD
LEVEL
JMPC is used to jump from
a subprogram to level 2. If
the JMPC is unnecessary,
remove it. If it should be
JMPB or JMP, correct it.
JMPC is used in other than
subprogram.