10. PMC
677
10.2.6 Online monitor setting screen
(a) Soft key
• [EMG ST] : Terminates communication forcibly. Use this key if
communication becomes abnormal and the
connection cannot be terminated normally.
• [INIT] : Initializes the parameters to their default values.
(b) Setting
• CPU ID : Displays a CPU ID value. However, do not
modify this item.
• RS–232C : Enables communication setting in the case of
connection via RS–232C. However, do not
modify the items of TIMER 1, TIMER 2,
TIMER 3, and MAX PACKET SIZE.
• HIGH SPEED I/F : Enables setting for connection via a high–
speed interface (HSSB, Ethernet).
(c) Communication status
• USE TIME : The maximum time in the communication
processing is displayed.
• RS–232C : The communication condition of RS–232C is
displayed.
• HIGH SPEED I/F : The communication condition of HIGH SPEED
I/F is displayed.
• ETHER_BOARD : Displayed during the communication with
Ethernet board. The IP address of the
communication partner is displayed.
• EMB_ETHERNET : Displayed during the communication with
embedded Ethernet. The IP address of the
communication partner is displayed.
• HSSB : Displayed during the communication with HSSB.