10
10.2 PMC–SA1
674
4 Press key to return to initial menu screen.
10.2.4.2 Input/output method
1 Press key in the initial menu screen, then display to [I/O] soft key.
2 Display next screen
EXEC
[][][][][]
CANCEL (NO.)
MONIT RUN
PMC I/O PROGRAM
CHANNEL = 1
DEVICE = HOST
FUNCTION =
DATA KIND =
3 Enter the desired channel number, then press the
INPUT
key to set the
number for CHANNEL.
1 : JD5A of the main CPU board
2 : JD5B of the main CPU board
4 Specify the I/O unit to be used for DEVICE.
HOST: I/O operation with FAPT LADDER (on the P-G, P-G Mate,
or personal computer)
FDCAS: I/O operation with a Floppy Cassette Adaptor
F-ROM: I/O operation with a flash EEPROM
M-CARD: I/O operation with a memory card
OTHERS: I/O operation with other I/O units
5 Specify the desired function with FUNCTION.
WRITE: Outputting data
READ: Inputting data
COMPARE: Comparing data in memory with that in an external device
DELETE: Deleting files on a floppy disk or memory card
LIST: Listing the files on a floppy disk or memory card
BLANK: Checking whether the flash EEPROM is empty
ERASE: Clearing the data in the flash EEPROM
FORMAT: Formatting a memory card (all data on the memory card
is deleted.)
6 Specify the desired type of data to be output at KIND DATA.
LADDER: Ladder programs
PARAM: PMC parameters
7 When FDCAS or M-CARD is specified for the device, a file can be
specified for FILE NO. by either its file number or file name.
8 Specify the RS-232C conditions for each device with SPEED.
9 Check that the settings are correct. Then, press the [EXEC] soft key.