19
19.3 Boot System (System Monitor)
924
Example screen (when NC BASIC of M series has been selected)
SELECT
[][][][][]
YES NO UP DOWN
ROM FILE CHECK
NC BASIC
0 B0H1 801B 000
1 B0H1 802B 001
2 B0H1 841B 002
3 B0H1 842B 003
4 B0H1 881B 004
5 B0H1 882B 005
6 B0H1 8C1B 006
7 B0H1 8C2B 007
***MESSAGE***
CONTINUE. HIT SELECT KEY.
Example
of
M series
B0H1 801B
000
Internal management unit
number
Edition
ROM number
Series
0
D When details of system file (NC BASIC, etc) are display :
Any non-ASCII code, or the symbol @, appearing in the
displayed file name indicates that the contents of FROM or the
data in the read file has been destroyed. Perform “1. SYSTEM
DATA LOADING” again.
3 Press the [SELECT] soft key to return to the SYSTEM DATA
CHECK screen.
(3) Return to the SYSTEM MONITOR MAIN MENU screen.
1 Position the cursor to END.
2 Press the [SELECT] soft key.
19.3.4 Deleting
F Deleting a FROM file (SYSTEM DATA DELETE screen)
NOTE Only user files, such as the ladder and macro P-code programs,
can be deleted. System files, such as NC BASIC, cannot be de-
leted.
(1) Select the SYSTEM DATA DELETE screen.
1 Using the [UP] or [DOWN] soft key, position the cursor to 3.
SYSTEM DATA DELETE.
2 Press the [SELECT] soft key.
When more than one board is connected to the NC, the SLOT
CONFIGURATION screen appears.
³ FROM files are listed on the screen as follows:
SELECT
[][][][][]
YES NO UP DOWN
***MESSAGE***
SELECT FILE AND HIT SELECT KEY.
SYSTEM DATA CHECK
[ BOARD : MAIN ]
FILE DIRECTORY
1. NC BASIC (10)
2. NC2 BSIC (8)
3. DGB0SRVO (2)
4. PS0B406G (8)
5. PS1B406G (4)
6. PS2B406G (4)
7. ETH2 EMB (8)
8. PMC–SB (1)
END