PROGRAMMING16. CUSTOM MACRO
By enabling subprograms (macro program) to be called with a T code in
a parameter, a macro program can be called each time the T code is
specified in the machining program.
Bit 5 of parameter 6001 = 1
By setting bit 5 (TCS) of parameter No.6001 to 1, the macro program
O9000 can be called when a T code is specified in the machining program.
A T code specified in a machining program is assigned to common
In a macro called with a G code or in a program called with an M or T code,
no subprograms can be called using a T code. A T code in such a macro
or program is treated as an ordinary T code.
Using a T Code