OPERATION
B–63684EN/01
8. DATA INPUT/OUTPUT
541
When this screen is displayed, the program data item is selected. The soft
keys for other screens are displayed by pressing the rightmost soft key
(next–menu key). Soft key [M–CARD] represents a separate
memory card function for saving and restoring system RAM data. (See
Sections 8.11.7 and Section NO TAG.)
MACRO (OPRT)WORKPITCH
(OPRT)M–CARD
When a data item other than program is selected, the screen displays only
a file directory.
A data item is indicated, in parentheses, on the title line.
READ/PUNCH (PARAMETER)
No. FILE NAME SIZE DATE
O0001 N00001
0001 O0222 332010 01/04/06
0002 O1003 334450 01/05/04
0003 MACROVAR.DAT 653400 01/05/12
0004 O0003 334610 01/05/04
0005 O0001 334254 01/06/04
0006 O0002 333750 01/06/04
0007 CNCPARAM.DAT 334453 01/06/04
~ ~
Program directory display does not match bit 0 (NAM) of parameter No.
3107, or bit 4 (SOR) of parameter No. 3107.
Display the following soft keys with soft key
[(OPRT)].
F SRH DELETEN READF READ PUNCH
The operation of each function is the same as on the directory (memory
card) screen. Soft key
[O SET], used for program number setting, and the
”PROGRAM NUMBER =” indication are not displayed for data items
other than program.
[F SRH] : Finds a specified file number.
[F READ] : Reads a specified file number.
[PUNCH] : Writes a file.
[N READ] : Reads a file under a specified file name.
[DELETE] : Deletes a specified file number.
NOTE
With a memory card, RMT mode operation and the
subprogram call function (based on the M198 command)
cannot be used.
Explanations
D Each data item
D Program directory
display
D Using each function