OPERATION
B–63684EN/01
11. SETTING AND DISPLAYING DATA
627
When the tool change function is used, the numbers of tools to be
substituted for tools registered on the tool number registration screen
(Item 11.4.3.2) can be displayed and specified.
(1)Displaying the screen
1 Press the
OFFSET
SETTING
function key.
2 Press the
menu key several times until the [TOOL] soft key
appears.
3 Press the [TOOL] soft key to display the initial tool registration
screen (Fig. 11.4.3.1).
4 Press the
menu key. Then press the [T.CHG.] soft key to
display the screen for entering the numbers of tools used for
replacement.
TOOL SET (CHANGE) O0010 N00000
NO. DATA NO. DATA NO. DATA NO. DATA
001 9 011 19 021 29 031 39
002 10 012 20 022 30 032 40
003 11 013 21 023 31 033 1
004 12 014 22 024 32 034 2
005 13 015 23 025 33 035 3
006 14 016 24 026 34 036 4
007 15 017 25 027 35 037 5
008 16 018 26 028 36 038 6
009 17 019 27 029 37 039 7
010 18 020 28 030 38 040 8
>_
MDI **** *** *** 13:39:33
[ T.NUM. ][ T.CHG. ][ T.CNT.][ SHAPE ][(OPRT)]
Fig. 11.4.3.3 Screen for Entering the Numbers of Tools Used for
Replacement
A number indicated on the screen corresponds to the tool registration
number on the tool registration screen (see Item 11.4.3.2).
(2)Setting items from the MDI
1 Set the mode to MDI.
2 Press the
OFFSET
SETTING
function key. Then press the [SETING] soft key
to enable the parameter write operation. The CNC indicates alarm
No. 100.
3 Display the screen for entering the numbers of tools used for
replacement by following the steps described in (1).
4 Move the cursor to the item to be changed.
Method 1
Move the cursor to the item to be changed with the page keys and
cursor keys.
11.4.3.3
Displaying and setting
items on the screen for
entering the numbers of
tools used for
replacement